NVMe_Quarch

Quarch_Data_Compare_Graceful_Power_Cycle.sh

Objective:

Enable VerifyWritesMode, start a compare test, perform graceful power cycling during writes, verify data was properly written prior to power down

Pass/Fail:

If the IO test fails

Quarch_REFCLK.sh

Objective:

Run an IO test, issue desired reset during the test

Pass/Fail:

Depends on the result of the IO test

Quarch_Data_Compare_Surprise_Power_Cycle_Verify_Write_Atomicity.sh

Objective:

Enable VerifyWritesMode, start a compare test, perform surprise power cycling during writes, verify data was properly written prior to power down

Pass/Fail:

If the IO test fails

Quarch_PERST.sh

Objective:

Run an IO test, issue desired reset during the test

Pass/Fail:

Depends on the result of the IO test

Quarch_Data_Compare_Surprise_Power_Cycle.sh

Objective:

Enable VerifyWritesMode, start a compare test, perform surprise power cycling during writes, verify data was properly written prior to power down

Pass/Fail:

If the IO test fails