V14_IOL_NVMe_MI¶
V14_IOL_NVMe_MI_VDM_04.06_ResDataStructType.sh¶
Objective:
Verify Read NVMe-MI Data Structure command with invalid value in data structure type field returns the correct responseNVMe-MI Reserved Data Structure Type test
Pass/Fail:
See test 4.6 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_08.08_MgmtEndpointBufferRead.sh¶
Objective:
Verify Management Endpoint Buffer Read commands with offsets and lengths respond appropriatelyNVMe-MI Management Endpoint Buffer Read test
Pass/Fail:
See test 8.8 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_01.01.01_MCTPEndpointIDResp.sh¶
Objective:
Verify reserved bits of MCTP endpoint ID response are set to zeroMCTP Get Endpoint ID response reserved bits test
Pass/Fail:
See test 1.1.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_11.03_VPDMultiRecArea.sh¶
Objective:
Verify particular fields of the NVMe MultiRecord Area in VPD Read outputNVMe-MI VPD Read NVMe MultiRecord Area test
Pass/Fail:
See test 11.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_06.01_ReservedFields.sh¶
Objective:
Verify the reserved fields in Dword 1 of the response to a command requestNVMe-MI Reserved Fields test
Pass/Fail:
See test 6.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_10.04_ControllerMetadata.sh¶
Objective:
Verify Controller Metadata functionalityNVMe-MI Controller Metadata test
Pass/Fail:
See test 10.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_07.04_RespMessageReplay.sh¶
Objective:
Verify Replay primitive command functionalityNVMe-MI Response Message Replay test
Pass/Fail:
See test 7.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_04.10_InvalidCommandSize.sh¶
Objective:
Verify Configuration Get MCTP Transmission Unit Size command with invalid length field returns the correct responseNVMe-MI Invalid Command Size test
Pass/Fail:
See test 4.10 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_03.01_MCTPSetEndpointID.sh¶
Objective:
Verify MCTP Set Endpoint ID command response is correctly structuredMCTP Set Endpoint ID test
Pass/Fail:
See test 3.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_10.03_NamespaceMetadata.sh¶
Objective:
Verify Namespace Metadata functionalityNVMe-MI Namespace Metadata test
Pass/Fail:
See test 10.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_04.03_HealthStatusChange.sh¶
Objective:
Verify Configuration Get Health Status Change command is successfulNVMe-MI Health Status Change test
Pass/Fail:
See test 4.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_09.04_AdminCmdProhibitedOOB.sh¶
Objective:
Verify prohibited admin commands return an errorNVMe admin commands prohibited out of band test
Pass/Fail:
See test 9.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_01.04.04_MCTPBadPacket4.sh¶
Objective:
Verify MCTP packet with an unknown destination ID is silently droppedMCTP Bad Packet 4 (invalid destination EIDs) test
Pass/Fail:
See test 1.4.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_06.03_CmdInitAutoPause.sh¶
Objective:
Verify Command Initiated Auto Pause functionalityNVMe-MI Command Initiated Auto Pause test
Pass/Fail:
See test 6.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_08.11_SESSend.sh¶
Objective:
Verify SES Send command functionalityNVMe-MI SES Send test
Pass/Fail:
See test 8.11 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_01.01.00_MCTPEndpointID.sh¶
Objective:
Verify an MCTP endpoint ID is returnedMCTP Get Endpoint ID test
Pass/Fail:
See test 1.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_09.05_Sanitize.sh¶
Objective:
Verify NVMe-MI commands issued during a Sanitize operation are successfulNVMe-MI commands issued during sanitize test
Pass/Fail:
See test 9.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_01.04.03_MCTPBadPacket3.sh¶
Objective:
Verify MCTP packet with tag owner set to 0 is silently droppedMCTP Bad Packet 3 (TO=0) test
Pass/Fail:
See test 1.4.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_08.02_ConfigurationSet.sh¶
Objective:
Verify Configuration Set command with invalid ID in configuration identifier field returns the correct responseNVMe-MI Configuration Set test
Pass/Fail:
See test 8.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_07.03_GetStatePrimResp.sh¶
Objective:
Verify Get State primitive command returns the correct state based on the conditions appliedNVMe-MI Get State Primitive Response test
Pass/Fail:
See test 7.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_01.04.01_MCTPBadPacket1.sh¶
Objective:
Verify unexpected MCTP middle and end packets are silently droppedMCTP Bad Packet 1 (invalid SOM/EOM combos) test
Pass/Fail:
See test 1.4.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_10.04_ControllerMetadata.sh¶
Objective:
Verify Controller Metadata functionalityNVMe-MI Controller Metadata test
Pass/Fail:
See test 10.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_05.01_MessageType.sh¶
Objective:
Verify message type in the command response is correctNVMe-MI Message Type test
Pass/Fail:
See test 5.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_11.03_VPDMultiRecArea.sh¶
Objective:
Verify particular fields of the NVMe MultiRecord Area in VPD Read outputNVMe-MI VPD Read NVMe MultiRecord Area test
Pass/Fail:
See test 11.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_07.05_RespReplayOffset.sh¶
Objective:
Verify Replay primitive with a specified offset returns the expected response packetsNVMe-MI Response Replay Offset test
Pass/Fail:
See test 7.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_03.06_MCTPGetEndpointID.sh¶
Objective:
Verify MCTP Get Endpoint ID command response is correctly structuredMCTP Get Endpoint ID test
Pass/Fail:
See test 3.6 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_08.07_DataLength.sh¶
Objective:
Verify Read Data Structure NVM Subsystem Info command response has the correct lengthNVMe-MI Data Length test
Pass/Fail:
See test 8.7 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_05.03_CRCCheck.sh¶
Objective:
Verify the CRC check in the command response passesNVMe-MI CRC Check test
Pass/Fail:
See test 5.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_08.07_DataLength.sh¶
Objective:
Verify Read Data Structure NVM Subsystem Info command response has the correct lengthNVMe-MI Data Length test
Pass/Fail:
See test 8.7 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_05.01_MessageType.sh¶
Objective:
Verify message type in the command response is correctNVMe-MI Message Type test
Pass/Fail:
See test 5.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_04.04_ReservedConfigID.sh¶
Objective:
Verify Configuration Set command with invalid ID in configuration identifier field returns the correct responseNVMe-MI Reserved Configuration ID test
Pass/Fail:
See test 4.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_03.06_MCTPGetEndpointID.sh¶
Objective:
Verify MCTP Get Endpoint ID command response is correctly structuredMCTP Get Endpoint ID test
Pass/Fail:
See test 3.6 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_03.03_MCTPGetMessageType.sh¶
Objective:
Verify MCTP Get Message Type command response is correctly structuredMCTP Get Message Type test
Pass/Fail:
See test 3.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_08.11_SESSend.sh¶
Objective:
Verify SES Send command functionalityNVMe-MI SES Send test
Pass/Fail:
See test 8.11 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_01.04.01_MCTPBadPacket1.sh¶
Objective:
Verify unexpected MCTP middle and end packets are silently droppedMCTP Bad Packet 1 (invalid SOM/EOM combos) test
Pass/Fail:
See test 1.4.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_08.11_SESSend.sh¶
Objective:
Verify SES Send command functionalityNVMe-MI SES Send test
Pass/Fail:
See test 8.11 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_08.13_VPDWrite.sh¶
Objective:
Verify VPD Write commands with offsets and lengths respond appropriatelyNVMe-MI VPD Write test
Pass/Fail:
See test 8.13 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_01.02_MCTPPacketSeqNum.sh¶
Objective:
Verify MCTP packet sequence number functionalityMCTP Packet Sequence Number test
Pass/Fail:
See test 1.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_08.09_MgmtEndpointBufferWrite.sh¶
Objective:
Verify Management Endpoint Buffer Write commands with offsets and lengths respond appropriatelyNVMe-MI Management Endpoint Buffer Write test
Pass/Fail:
See test 8.9 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_05.05_ReqDataSizeMismatch.sh¶
Objective:
Verify the correct behavior occurs when the request data doesn’t match the specified data lengthNVMe-MI Request Data Size Mismatch test
Pass/Fail:
See test 5.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_09.02_GetLogPage.sh¶
Objective:
Verify Get Log Page command is successfulNVMe Get Log Page command test
Pass/Fail:
See test 9.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_02.01_MCTPCtrlInstanceID.sh¶
Objective:
Verify instance ID in MCTP request and response packets are the sameMCTP Control Instance ID test
Pass/Fail:
See test 2.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_08.07_DataLength.sh¶
Objective:
Verify Read Data Structure NVM Subsystem Info command response has the correct lengthNVMe-MI Data Length test
Pass/Fail:
See test 8.7 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_06.03_CmdInitAutoPause.sh¶
Objective:
Verify Command Initiated Auto Pause functionalityNVMe-MI Command Initiated Auto Pause test
Pass/Fail:
See test 6.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_08.13_VPDWrite.sh¶
Objective:
Verify VPD Write commands with offsets and lengths respond appropriatelyNVMe-MI VPD Write test
Pass/Fail:
See test 8.13 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_04.05_MAXRENTError.sh¶
Objective:
Verify Configuration Get Health Status Change command with invalid value in MAXRENT field returns the correct responseNVMe-MI MAXRENT Error test
Pass/Fail:
See test 4.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_07.03_GetStatePrimResp.sh¶
Objective:
Verify Get State primitive command returns the correct state based on the conditions appliedNVMe-MI Get State Primitive Response test
Pass/Fail:
See test 7.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_09.01_Identify.sh¶
Objective:
Verify Identify Controller command is successfulNVMe Identify command test
Pass/Fail:
See test 9.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_08.09_MgmtEndpointBufferWrite.sh¶
Objective:
Verify Management Endpoint Buffer Write commands with offsets and lengths respond appropriatelyNVMe-MI Management Endpoint Buffer Write test
Pass/Fail:
See test 8.9 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_07.02_ResponseMessage.sh¶
Objective:
Verify various control primitive commands are successfulNVMe-MI Response Message test
Pass/Fail:
See test 7.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_11.04_VPDPCIePortMultiRecArea.sh¶
Objective:
Verify particular fields of the NVMe PCIe Port MultiRecord Area in VPD Read outputNVMe-MI VPD Read NVMe PCIe Port MultiRecord Area test
Pass/Fail:
See test 11.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_10.01_IdentifyMECap.sh¶
Objective:
Decode the Management Endpoint Capabilities field in the Identify Controller responseNVMe-MI Identify Controller Management Endpoint Capabilities test
Pass/Fail:
See test 10.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_10.01_IdentifyMECap.sh¶
Objective:
Decode the Management Endpoint Capabilities field in the Identify Controller responseNVMe-MI Identify Controller Management Endpoint Capabilities test
Pass/Fail:
See test 10.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_01.04.05_MCTPBadPacket5.sh¶
Objective:
Verify MCTP packet with a bad header version is silently droppedMCTP Bad Packet 5 (bad header version) test
Pass/Fail:
See test 1.4.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_09.01_Identify.sh¶
Objective:
Verify Identify Controller command is successfulNVMe Identify command test
Pass/Fail:
See test 9.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_03.04_MCTPPrepEndpointDisc.sh¶
Objective:
Verify MCTP Prepare for Endpoint Discovery command returns the correct responseMCTP Prepare for Endpoint Discovery test
Pass/Fail:
See test 3.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_06.03_CmdInitAutoPause.sh¶
Objective:
Verify Command Initiated Auto Pause functionalityNVMe-MI Command Initiated Auto Pause test
Pass/Fail:
See test 6.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_09.05_Sanitize.sh¶
Objective:
Verify NVMe-MI commands issued during a Sanitize operation are successfulNVMe-MI commands issued during sanitize test
Pass/Fail:
See test 9.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_04.01_InvalidOpcode.sh¶
Objective:
Verify MCTP command with invalid opcode returns the correct responseNVMe-MI Invalid Opcode test
Pass/Fail:
See test 4.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_08.04_NVMSubsystemHealth.sh¶
Objective:
Verify NVM Subsystem Health Status Poll command response is correctly structuredNVMe-MI NVM Subsystem Health Status Poll test
Pass/Fail:
See test 8.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_01.04.02_MCTPBadPacket2.sh¶
Objective:
Verify MCTP packet with a bad message integrity check is silently droppedMCTP Bad Packet 2 (bad message integrity check) test
Pass/Fail:
See test 1.4.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_08.03_ConfigGetResponse.sh¶
Objective:
Verify Configuration Get command response is correctly structuredNVMe-MI Config Get Response test
Pass/Fail:
See test 8.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_04.07_InvalidVPDReadSize.sh¶
Objective:
Verify VPD Read command with differing length and offset combinations returns the correct responseNVMe-MI Invalid VPD Read Size test
Pass/Fail:
See test 4.7 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_01.03_MCTP-TO-MsgTag.sh¶
Objective:
Verify tag owner and message tag fields remain the same for all packets from SOM through EOMMCTP Tag Owner and Message Tag bits test
Pass/Fail:
See test 1.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_03.02_MCTPGetMCTPVersion.sh¶
Objective:
Verify MCTP Get Version Support command returns the correct responseMCTP Get MCTP Version test
Pass/Fail:
See test 3.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_01.04.04_MCTPBadPacket4.sh¶
Objective:
Verify MCTP packet with an unknown destination ID is silently droppedMCTP Bad Packet 4 (invalid destination EIDs) test
Pass/Fail:
See test 1.4.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_04.02_ReservedID.sh¶
Objective:
Verify Configuration Get command with reserved ID in configuration identifier field returns the correct responseNVMe-MI Reserved Identifier test
Pass/Fail:
See test 4.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_06.01_ReservedFields.sh¶
Objective:
Verify the reserved fields in Dword 1 of the response to a command requestNVMe-MI Reserved Fields test
Pass/Fail:
See test 6.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_09.03_GetFeatures.sh¶
Objective:
Verify Get Features command is successfulNVMe Get Features command test
Pass/Fail:
See test 9.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_06.01_ReservedFields.sh¶
Objective:
Verify the reserved fields in Dword 1 of the response to a command requestNVMe-MI Reserved Fields test
Pass/Fail:
See test 6.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_08.05_ControllerHealth.sh¶
Objective:
Verify Controller Health Status Poll command response is correctly structuredNVMe-MI Controller Health Status Poll test
Pass/Fail:
See test 8.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_04.03_HealthStatusChange.sh¶
Objective:
Verify Configuration Get Health Status Change command is successfulNVMe-MI Health Status Change test
Pass/Fail:
See test 4.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_08.05_ControllerHealth.sh¶
Objective:
Verify Controller Health Status Poll command response is correctly structuredNVMe-MI Controller Health Status Poll test
Pass/Fail:
See test 8.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_01.01.01_MCTPEndpointIDResp.sh¶
Objective:
Verify reserved bits of MCTP endpoint ID response are set to zeroMCTP Get Endpoint ID response reserved bits test
Pass/Fail:
See test 1.1.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_09.04_AdminCmdProhibitedOOB.sh¶
Objective:
Verify prohibited admin commands return an errorNVMe admin commands prohibited out of band test
Pass/Fail:
See test 9.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_08.12_VPDRead.sh¶
Objective:
Verify VPD Read commands with offsets and lengths respond appropriatelyNVMe-MI VPD Read test
Pass/Fail:
See test 8.12 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_04.08_InvalidVPDWriteSize.sh¶
Objective:
Verify VPD Write command with differing length and offset combinations returns the correct responseNVMe-MI Invalid VPD Write Size test
Pass/Fail:
See test 4.8 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_05.02_MessageIC.sh¶
Objective:
Verify the correct behavior occurs based on the integrity check value in the command requestNVMe-MI Message Integrity Check test
Pass/Fail:
See test 5.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_07.04_RespMessageReplay.sh¶
Objective:
Verify Replay primitive command functionalityNVMe-MI Response Message Replay test
Pass/Fail:
See test 7.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_09.04_AdminCmdProhibitedOOB.sh¶
Objective:
Verify prohibited admin commands return an errorNVMe admin commands prohibited out of band test
Pass/Fail:
See test 9.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_11.02_VPDTopologyMultiRecArea.sh¶
Objective:
Verify particular fields of the Topology MultiRecord Area in VPD Read outputNVMe-MI VPD Read Topology MultiRecord Area test
Pass/Fail:
See test 11.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_06.02_ErrorResponseCode.sh¶
Objective:
Verify the correct error code is returned in the responseNVMe-MI Error Response Code test
Pass/Fail:
See test 6.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_08.10_SESReceive.sh¶
Objective:
Verify SES Receive command functionalityNVMe-MI SES Receive test
Pass/Fail:
See test 8.10 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_07.02_ResponseMessage.sh¶
Objective:
Verify various control primitive commands are successfulNVMe-MI Response Message test
Pass/Fail:
See test 7.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_01.01.01_MCTPEndpointIDResp.sh¶
Objective:
Verify reserved bits of MCTP endpoint ID response are set to zeroMCTP Get Endpoint ID response reserved bits test
Pass/Fail:
See test 1.1.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_04.07_InvalidVPDReadSize.sh¶
Objective:
Verify VPD Read command with differing length and offset combinations returns the correct responseNVMe-MI Invalid VPD Read Size test
Pass/Fail:
See test 4.7 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_08.01_ResponseHeader.sh¶
Objective:
Verify reserved fields and integrity check field in the response NVMe-MI Response Header test
Pass/Fail:
See test 8.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_04.09_InvalidParamStatus.sh¶
Objective:
Verify NVMe-MI commands with invalid fields return the correct responseNVMe-MI Invalid Parameter Status test
Pass/Fail:
See test 4.9 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_04.10_InvalidCommandSize.sh¶
Objective:
Verify Configuration Get MCTP Transmission Unit Size command with invalid length field returns the correct responseNVMe-MI Invalid Command Size test
Pass/Fail:
See test 4.10 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_01.02_MCTPPacketSeqNum.sh¶
Objective:
Verify MCTP packet sequence number functionalityMCTP Packet Sequence Number test
Pass/Fail:
See test 1.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_04.02_ReservedID.sh¶
Objective:
Verify Configuration Get command with reserved ID in configuration identifier field returns the correct responseNVMe-MI Reserved Identifier test
Pass/Fail:
See test 4.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_12.01_PCIeReset.sh¶
Objective:
Verify PCIe Reset functionalityNVMe-MI PCIe Reset test
Pass/Fail:
See test 12.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_12.01_PCIeReset.sh¶
Objective:
Verify PCIe Reset functionalityNVMe-MI PCIe Reset test
Pass/Fail:
See test 12.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_02.01_MCTPCtrlInstanceID.sh¶
Objective:
Verify instance ID in MCTP request and response packets are the sameMCTP Control Instance ID test
Pass/Fail:
See test 2.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_09.03_GetFeatures.sh¶
Objective:
Verify Get Features command is successfulNVMe Get Features command test
Pass/Fail:
See test 9.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_10.03_NamespaceMetadata.sh¶
Objective:
Verify Namespace Metadata functionalityNVMe-MI Namespace Metadata test
Pass/Fail:
See test 10.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_05.05_ReqDataSizeMismatch.sh¶
Objective:
Verify the correct behavior occurs when the request data doesn’t match the specified data lengthNVMe-MI Request Data Size Mismatch test
Pass/Fail:
See test 5.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_03.03_MCTPGetMessageType.sh¶
Objective:
Verify MCTP Get Message Type command response is correctly structuredMCTP Get Message Type test
Pass/Fail:
See test 3.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_03.05_MCTPEndpointDisc.sh¶
Objective:
Verify MCTP Endpoint Discovery command returns the correct responseMCTP Endpoint Discovery test
Pass/Fail:
See test 3.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_04.08_InvalidVPDWriteSize.sh¶
Objective:
Verify VPD Write command with differing length and offset combinations returns the correct responseNVMe-MI Invalid VPD Write Size test
Pass/Fail:
See test 4.8 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_08.08_MgmtEndpointBufferRead.sh¶
Objective:
Verify Management Endpoint Buffer Read commands with offsets and lengths respond appropriatelyNVMe-MI Management Endpoint Buffer Read test
Pass/Fail:
See test 8.8 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_07.01_ResponseTag.sh¶
Objective:
Verify tag value in request and response messages are the sameNVMe-MI Response Tag test
Pass/Fail:
See test 7.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_10.02_IdentifyCap.sh¶
Objective:
Verify reserved fields in the Management Endpoint Capabilities field in the Identify Controller response are set to zeroNVMe-MI Identify Controller Management Endpoint Capabilities reserved fields test
Pass/Fail:
See test 10.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_01.04.03_MCTPBadPacket3.sh¶
Objective:
Verify MCTP packet with tag owner set to 0 is silently droppedMCTP Bad Packet 3 (TO=0) test
Pass/Fail:
See test 1.4.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_03.04_MCTPPrepEndpointDisc.sh¶
Objective:
Verify MCTP Prepare for Endpoint Discovery command returns the correct responseMCTP Prepare for Endpoint Discovery test
Pass/Fail:
See test 3.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_08.10_SESReceive.sh¶
Objective:
Verify SES Receive command functionalityNVMe-MI SES Receive test
Pass/Fail:
See test 8.10 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_04.05_MAXRENTError.sh¶
Objective:
Verify Configuration Get Health Status Change command with invalid value in MAXRENT field returns the correct responseNVMe-MI MAXRENT Error test
Pass/Fail:
See test 4.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_04.02_ReservedID.sh¶
Objective:
Verify Configuration Get command with reserved ID in configuration identifier field returns the correct responseNVMe-MI Reserved Identifier test
Pass/Fail:
See test 4.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_10.02_IdentifyCap.sh¶
Objective:
Verify reserved fields in the Management Endpoint Capabilities field in the Identify Controller response are set to zeroNVMe-MI Identify Controller Management Endpoint Capabilities reserved fields test
Pass/Fail:
See test 10.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_11.02_VPDTopologyMultiRecArea.sh¶
Objective:
Verify particular fields of the Topology MultiRecord Area in VPD Read outputNVMe-MI VPD Read Topology MultiRecord Area test
Pass/Fail:
See test 11.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_04.04_ReservedConfigID.sh¶
Objective:
Verify Configuration Set command with invalid ID in configuration identifier field returns the correct responseNVMe-MI Reserved Configuration ID test
Pass/Fail:
See test 4.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_01.04.02_MCTPBadPacket2.sh¶
Objective:
Verify MCTP packet with a bad message integrity check is silently droppedMCTP Bad Packet 2 (bad message integrity check) test
Pass/Fail:
See test 1.4.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_07.04_RespMessageReplay.sh¶
Objective:
Verify Replay primitive command functionalityNVMe-MI Response Message Replay test
Pass/Fail:
See test 7.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_08.10_SESReceive.sh¶
Objective:
Verify SES Receive command functionalityNVMe-MI SES Receive test
Pass/Fail:
See test 8.10 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_01.01.00_MCTPEndpointID.sh¶
Objective:
Verify an MCTP endpoint ID is returnedMCTP Get Endpoint ID test
Pass/Fail:
See test 1.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_01.03_MCTP-TO-MsgTag.sh¶
Objective:
Verify tag owner and message tag fields remain the same for all packets from SOM through EOMMCTP Tag Owner and Message Tag bits test
Pass/Fail:
See test 1.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_08.01_ResponseHeader.sh¶
Objective:
Verify reserved fields and integrity check field in the response NVMe-MI Response Header test
Pass/Fail:
See test 8.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_11.01_VPDDefaultValues.sh¶
Objective:
Verify reserved fields in the Common Header element in the VPD Read response are set to zeroNVMe-MI VPD Default Values test
Pass/Fail:
See test 11.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_05.04_CommandSlot.sh¶
Objective:
Verify CSI field in request and response messages are the sameNVMe-MI Command Slot test
Pass/Fail:
See test 5.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_04.01_InvalidOpcode.sh¶
Objective:
Verify MCTP command with invalid opcode returns the correct responseNVMe-MI Invalid Opcode test
Pass/Fail:
See test 4.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_08.08_MgmtEndpointBufferRead.sh¶
Objective:
Verify Management Endpoint Buffer Read commands with offsets and lengths respond appropriatelyNVMe-MI Management Endpoint Buffer Read test
Pass/Fail:
See test 8.8 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_04.04_ReservedConfigID.sh¶
Objective:
Verify Configuration Set command with invalid ID in configuration identifier field returns the correct responseNVMe-MI Reserved Configuration ID test
Pass/Fail:
See test 4.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_11.01_VPDDefaultValues.sh¶
Objective:
Verify reserved fields in the Common Header element in the VPD Read response are set to zeroNVMe-MI VPD Default Values test
Pass/Fail:
See test 11.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_03.04_MCTPPrepEndpointDisc.sh¶
Objective:
Verify MCTP Prepare for Endpoint Discovery command returns the correct responseMCTP Prepare for Endpoint Discovery test
Pass/Fail:
See test 3.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_05.02_MessageIC.sh¶
Objective:
Verify the correct behavior occurs based on the integrity check value in the command requestNVMe-MI Message Integrity Check test
Pass/Fail:
See test 5.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_05.01_MessageType.sh¶
Objective:
Verify message type in the command response is correctNVMe-MI Message Type test
Pass/Fail:
See test 5.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_01.04.02_MCTPBadPacket2.sh¶
Objective:
Verify MCTP packet with a bad message integrity check is silently droppedMCTP Bad Packet 2 (bad message integrity check) test
Pass/Fail:
See test 1.4.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_09.03_GetFeatures.sh¶
Objective:
Verify Get Features command is successfulNVMe Get Features command test
Pass/Fail:
See test 9.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_04.03_HealthStatusChange.sh¶
Objective:
Verify Configuration Get Health Status Change command is successfulNVMe-MI Health Status Change test
Pass/Fail:
See test 4.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_01.04.05_MCTPBadPacket5.sh¶
Objective:
Verify MCTP packet with a bad header version is silently droppedMCTP Bad Packet 5 (bad header version) test
Pass/Fail:
See test 1.4.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_02.01_MCTPCtrlInstanceID.sh¶
Objective:
Verify instance ID in MCTP request and response packets are the sameMCTP Control Instance ID test
Pass/Fail:
See test 2.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_07.05_RespReplayOffset.sh¶
Objective:
Verify Replay primitive with a specified offset returns the expected response packetsNVMe-MI Response Replay Offset test
Pass/Fail:
See test 7.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_09.02_GetLogPage.sh¶
Objective:
Verify Get Log Page command is successfulNVMe Get Log Page command test
Pass/Fail:
See test 9.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_03.05_MCTPEndpointDisc.sh¶
Objective:
Verify MCTP Endpoint Discovery command returns the correct responseMCTP Endpoint Discovery test
Pass/Fail:
See test 3.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_07.01_ResponseTag.sh¶
Objective:
Verify tag value in request and response messages are the sameNVMe-MI Response Tag test
Pass/Fail:
See test 7.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_08.09_MgmtEndpointBufferWrite.sh¶
Objective:
Verify Management Endpoint Buffer Write commands with offsets and lengths respond appropriatelyNVMe-MI Management Endpoint Buffer Write test
Pass/Fail:
See test 8.9 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_03.03_MCTPGetMessageType.sh¶
Objective:
Verify MCTP Get Message Type command response is correctly structuredMCTP Get Message Type test
Pass/Fail:
See test 3.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_09.01_Identify.sh¶
Objective:
Verify Identify Controller command is successfulNVMe Identify command test
Pass/Fail:
See test 9.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_08.05_ControllerHealth.sh¶
Objective:
Verify Controller Health Status Poll command response is correctly structuredNVMe-MI Controller Health Status Poll test
Pass/Fail:
See test 8.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_04.09_InvalidParamStatus.sh¶
Objective:
Verify NVMe-MI commands with invalid fields return the correct responseNVMe-MI Invalid Parameter Status test
Pass/Fail:
See test 4.9 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_08.04_NVMSubsystemHealth.sh¶
Objective:
Verify NVM Subsystem Health Status Poll command response is correctly structuredNVMe-MI NVM Subsystem Health Status Poll test
Pass/Fail:
See test 8.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_11.04_VPDPCIePortMultiRecArea.sh¶
Objective:
Verify particular fields of the NVMe PCIe Port MultiRecord Area in VPD Read outputNVMe-MI VPD Read NVMe PCIe Port MultiRecord Area test
Pass/Fail:
See test 11.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_04.10_InvalidCommandSize.sh¶
Objective:
Verify Configuration Get MCTP Transmission Unit Size command with invalid length field returns the correct responseNVMe-MI Invalid Command Size test
Pass/Fail:
See test 4.10 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_05.03_CRCCheck.sh¶
Objective:
Verify the CRC check in the command response passesNVMe-MI CRC Check test
Pass/Fail:
See test 5.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_05.06_MCTPPacketPadding.sh¶
Objective:
Verify the correct response behavior occurs based on the command requests issuedNVMe-MI MCTP Packet Padding test
Pass/Fail:
See test 5.6 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_07.02_ResponseMessage.sh¶
Objective:
Verify various control primitive commands are successfulNVMe-MI Response Message test
Pass/Fail:
See test 7.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_05.04_CommandSlot.sh¶
Objective:
Verify CSI field in request and response messages are the sameNVMe-MI Command Slot test
Pass/Fail:
See test 5.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_04.08_InvalidVPDWriteSize.sh¶
Objective:
Verify VPD Write command with differing length and offset combinations returns the correct responseNVMe-MI Invalid VPD Write Size test
Pass/Fail:
See test 4.8 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_05.03_CRCCheck.sh¶
Objective:
Verify the CRC check in the command response passesNVMe-MI CRC Check test
Pass/Fail:
See test 5.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_05.05_ReqDataSizeMismatch.sh¶
Objective:
Verify the correct behavior occurs when the request data doesn’t match the specified data lengthNVMe-MI Request Data Size Mismatch test
Pass/Fail:
See test 5.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_05.04_CommandSlot.sh¶
Objective:
Verify CSI field in request and response messages are the sameNVMe-MI Command Slot test
Pass/Fail:
See test 5.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_04.01_InvalidOpcode.sh¶
Objective:
Verify MCTP command with invalid opcode returns the correct responseNVMe-MI Invalid Opcode test
Pass/Fail:
See test 4.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_08.04_NVMSubsystemHealth.sh¶
Objective:
Verify NVM Subsystem Health Status Poll command response is correctly structuredNVMe-MI NVM Subsystem Health Status Poll test
Pass/Fail:
See test 8.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_07.03_GetStatePrimResp.sh¶
Objective:
Verify Get State primitive command returns the correct state based on the conditions appliedNVMe-MI Get State Primitive Response test
Pass/Fail:
See test 7.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_04.07_InvalidVPDReadSize.sh¶
Objective:
Verify VPD Read command with differing length and offset combinations returns the correct responseNVMe-MI Invalid VPD Read Size test
Pass/Fail:
See test 4.7 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_03.02_MCTPGetMCTPVersion.sh¶
Objective:
Verify MCTP Get Version Support command returns the correct responseMCTP Get MCTP Version test
Pass/Fail:
See test 3.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_01.04.05_MCTPBadPacket5.sh¶
Objective:
Verify MCTP packet with a bad header version is silently droppedMCTP Bad Packet 5 (bad header version) test
Pass/Fail:
See test 1.4.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_11.01_VPDDefaultValues.sh¶
Objective:
Verify reserved fields in the Common Header element in the VPD Read response are set to zeroNVMe-MI VPD Default Values test
Pass/Fail:
See test 11.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_11.03_VPDMultiRecArea.sh¶
Objective:
Verify particular fields of the NVMe MultiRecord Area in VPD Read outputNVMe-MI VPD Read NVMe MultiRecord Area test
Pass/Fail:
See test 11.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_03.05_MCTPEndpointDisc.sh¶
Objective:
Verify MCTP Endpoint Discovery command returns the correct responseMCTP Endpoint Discovery test
Pass/Fail:
See test 3.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_05.06_MCTPPacketPadding.sh¶
Objective:
Verify the correct response behavior occurs based on the command requests issuedNVMe-MI MCTP Packet Padding test
Pass/Fail:
See test 5.6 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_05.02_MessageIC.sh¶
Objective:
Verify the correct behavior occurs based on the integrity check value in the command requestNVMe-MI Message Integrity Check test
Pass/Fail:
See test 5.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_10.02_IdentifyCap.sh¶
Objective:
Verify reserved fields in the Management Endpoint Capabilities field in the Identify Controller response are set to zeroNVMe-MI Identify Controller Management Endpoint Capabilities reserved fields test
Pass/Fail:
See test 10.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_01.03_MCTP-TO-MsgTag.sh¶
Objective:
Verify tag owner and message tag fields remain the same for all packets from SOM through EOMMCTP Tag Owner and Message Tag bits test
Pass/Fail:
See test 1.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_08.06_ReadDataStructure.sh¶
Objective:
Verify Read Data Structure command response is correctly structuredNVMe-MI Read Data Structure test
Pass/Fail:
See test 8.6 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_03.06_MCTPGetEndpointID.sh¶
Objective:
Verify MCTP Get Endpoint ID command response is correctly structuredMCTP Get Endpoint ID test
Pass/Fail:
See test 3.6 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_08.03_ConfigGetResponse.sh¶
Objective:
Verify Configuration Get command response is correctly structuredNVMe-MI Config Get Response test
Pass/Fail:
See test 8.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_08.13_VPDWrite.sh¶
Objective:
Verify VPD Write commands with offsets and lengths respond appropriatelyNVMe-MI VPD Write test
Pass/Fail:
See test 8.13 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_01.04.01_MCTPBadPacket1.sh¶
Objective:
Verify unexpected MCTP middle and end packets are silently droppedMCTP Bad Packet 1 (invalid SOM/EOM combos) test
Pass/Fail:
See test 1.4.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_05.06_MCTPPacketPadding.sh¶
Objective:
Verify the correct response behavior occurs based on the command requests issuedNVMe-MI MCTP Packet Padding test
Pass/Fail:
See test 5.6 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_04.06_ResDataStructType.sh¶
Objective:
Verify Read NVMe-MI Data Structure command with invalid value in data structure type field returns the correct responseNVMe-MI Reserved Data Structure Type test
Pass/Fail:
See test 4.6 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_09.05_Sanitize.sh¶
Objective:
Verify NVMe-MI commands issued during a Sanitize operation are successfulNVMe-MI commands issued during sanitize test
Pass/Fail:
See test 9.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_10.04_ControllerMetadata.sh¶
Objective:
Verify Controller Metadata functionalityNVMe-MI Controller Metadata test
Pass/Fail:
See test 10.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_03.01_MCTPSetEndpointID.sh¶
Objective:
Verify MCTP Set Endpoint ID command response is correctly structuredMCTP Set Endpoint ID test
Pass/Fail:
See test 3.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_04.05_MAXRENTError.sh¶
Objective:
Verify Configuration Get Health Status Change command with invalid value in MAXRENT field returns the correct responseNVMe-MI MAXRENT Error test
Pass/Fail:
See test 4.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_08.02_ConfigurationSet.sh¶
Objective:
Verify Configuration Set command with invalid ID in configuration identifier field returns the correct responseNVMe-MI Configuration Set test
Pass/Fail:
See test 8.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_05.07_MessageIntegCheck.sh¶
Objective:
Verify the correct behavior occurs based on the message integrity check value in the command requestNVMe-MI Message Integrity Check fail test
Pass/Fail:
See test 5.7 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_08.03_ConfigGetResponse.sh¶
Objective:
Verify Configuration Get command response is correctly structuredNVMe-MI Config Get Response test
Pass/Fail:
See test 8.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_10.03_NamespaceMetadata.sh¶
Objective:
Verify Namespace Metadata functionalityNVMe-MI Namespace Metadata test
Pass/Fail:
See test 10.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_10.01_IdentifyMECap.sh¶
Objective:
Decode the Management Endpoint Capabilities field in the Identify Controller responseNVMe-MI Identify Controller Management Endpoint Capabilities test
Pass/Fail:
See test 10.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_03.01_MCTPSetEndpointID.sh¶
Objective:
Verify MCTP Set Endpoint ID command response is correctly structuredMCTP Set Endpoint ID test
Pass/Fail:
See test 3.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_06.02_ErrorResponseCode.sh¶
Objective:
Verify the correct error code is returned in the responseNVMe-MI Error Response Code test
Pass/Fail:
See test 6.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_08.12_VPDRead.sh¶
Objective:
Verify VPD Read commands with offsets and lengths respond appropriatelyNVMe-MI VPD Read test
Pass/Fail:
See test 8.12 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_01.02_MCTPPacketSeqNum.sh¶
Objective:
Verify MCTP packet sequence number functionalityMCTP Packet Sequence Number test
Pass/Fail:
See test 1.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_08.02_ConfigurationSet.sh¶
Objective:
Verify Configuration Set command with invalid ID in configuration identifier field returns the correct responseNVMe-MI Configuration Set test
Pass/Fail:
See test 8.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_01.04.04_MCTPBadPacket4.sh¶
Objective:
Verify MCTP packet with an unknown destination ID is silently droppedMCTP Bad Packet 4 (invalid destination EIDs) test
Pass/Fail:
See test 1.4.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_11.04_VPDPCIePortMultiRecArea.sh¶
Objective:
Verify particular fields of the NVMe PCIe Port MultiRecord Area in VPD Read outputNVMe-MI VPD Read NVMe PCIe Port MultiRecord Area test
Pass/Fail:
See test 11.4 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_04.06_ResDataStructType.sh¶
Objective:
Verify Read NVMe-MI Data Structure command with invalid value in data structure type field returns the correct responseNVMe-MI Reserved Data Structure Type test
Pass/Fail:
See test 4.6 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_01.04.03_MCTPBadPacket3.sh¶
Objective:
Verify MCTP packet with tag owner set to 0 is silently droppedMCTP Bad Packet 3 (TO=0) test
Pass/Fail:
See test 1.4.3 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_06.02_ErrorResponseCode.sh¶
Objective:
Verify the correct error code is returned in the responseNVMe-MI Error Response Code test
Pass/Fail:
See test 6.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_05.07_MessageIntegCheck.sh¶
Objective:
Verify the correct behavior occurs based on the message integrity check value in the command requestNVMe-MI Message Integrity Check fail test
Pass/Fail:
See test 5.7 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_05.07_MessageIntegCheck.sh¶
Objective:
Verify the correct behavior occurs based on the message integrity check value in the command requestNVMe-MI Message Integrity Check fail test
Pass/Fail:
See test 5.7 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_01.01.00_MCTPEndpointID.sh¶
Objective:
Verify an MCTP endpoint ID is returnedMCTP Get Endpoint ID test
Pass/Fail:
See test 1.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_07.05_RespReplayOffset.sh¶
Objective:
Verify Replay primitive with a specified offset returns the expected response packetsNVMe-MI Response Replay Offset test
Pass/Fail:
See test 7.5 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_09.02_GetLogPage.sh¶
Objective:
Verify Get Log Page command is successfulNVMe Get Log Page command test
Pass/Fail:
See test 9.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_08.06_ReadDataStructure.sh¶
Objective:
Verify Read Data Structure command response is correctly structuredNVMe-MI Read Data Structure test
Pass/Fail:
See test 8.6 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_12.01_PCIeReset.sh¶
Objective:
Verify PCIe Reset functionalityNVMe-MI PCIe Reset test
Pass/Fail:
See test 12.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_07.01_ResponseTag.sh¶
Objective:
Verify tag value in request and response messages are the sameNVMe-MI Response Tag test
Pass/Fail:
See test 7.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_08.01_ResponseHeader.sh¶
Objective:
Verify reserved fields and integrity check field in the response NVMe-MI Response Header test
Pass/Fail:
See test 8.1 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_08.06_ReadDataStructure.sh¶
Objective:
Verify Read Data Structure command response is correctly structuredNVMe-MI Read Data Structure test
Pass/Fail:
See test 8.6 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_SMBus_04.09_InvalidParamStatus.sh¶
Objective:
Verify NVMe-MI commands with invalid fields return the correct responseNVMe-MI Invalid Parameter Status test
Pass/Fail:
See test 4.9 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_03.02_MCTPGetMCTPVersion.sh¶
Objective:
Verify MCTP Get Version Support command returns the correct responseMCTP Get MCTP Version test
Pass/Fail:
See test 3.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_Inband_08.12_VPDRead.sh¶
Objective:
Verify VPD Read commands with offsets and lengths respond appropriatelyNVMe-MI VPD Read test
Pass/Fail:
See test 8.12 in the UNH-IOL NVMe-MI conformance v14.0 testplan
V14_IOL_NVMe_MI_VDM_11.02_VPDTopologyMultiRecArea.sh¶
Objective:
Verify particular fields of the Topology MultiRecord Area in VPD Read outputNVMe-MI VPD Read Topology MultiRecord Area test
Pass/Fail:
See test 11.2 in the UNH-IOL NVMe-MI conformance v14.0 testplan