V80_IOL_NVMe¶
V80_IOL_NVMe_08.01_AutoPSTranEnable.sh¶
Objective:
Autonomous power state transitions enabled tests
Pass/Fail:
V80_IOL_NVMe_07.08_CmdBehavDifResType.sh¶
Objective:
Command behavior tests in the presence of different reservation types
Pass/Fail:
V80_IOL_NVMe_04.14_RegCC-CSS.sh¶
Objective:
CC controller register I/O command set selected (CSS) tests
Pass/Fail:
V80_IOL_NVMe_04.08_RegCAP-MQES.sh¶
Objective:
CAP controller register maximum queue entries supported (MQES) tests
Pass/Fail:
V80_IOL_NVMe_06.01_ConventionalReset.sh¶
Objective:
Controller level reset conventional reset tests
Pass/Fail:
V80_IOL_NVMe_01.04_CreateDeleteQueue.sh¶
Objective:
Create and delete I/O submission and completion queue command tests
Pass/Fail:
V80_IOL_NVMe_04.11_RegCC-IOSQES.sh¶
Objective:
CC controller register I/O submissions queue entry size (IOSQES) tests
Pass/Fail:
V80_IOL_NVMe_06.03_ControllerReset.sh¶
Objective:
Controller level reset controller reset tests
Pass/Fail:
V80_IOL_NVMe_02.09_AWUN-NAWUN.sh¶
Objective:
Atomic Write Unit Normal (AWUN) and Namespace Atomic Write Unit Normal (NAWUN) command tests
Pass/Fail:
V80_IOL_NVMe_06.04_NVMSubsystemReset.sh¶
Objective:
Controller level reset NVM subsystem reset tests
Pass/Fail:
V80_IOL_NVMe_05.01_PageBaseAddress.sh¶
Objective:
Page base address and offset (PBAO) tests
Pass/Fail:
V80_IOL_NVMe_01.02_SetGetFeatures.sh¶
Objective:
Set features and get features command tests
Pass/Fail:
V80_IOL_NVMe_04.04_RegCAP-DSTRD.sh¶
Objective:
CAP controller register doorbell stride (DSTRD) tests
Pass/Fail:
V80_IOL_NVMe_08.02_ReturnNonOpState.sh¶
Objective:
Return from non-operational power state tests
Pass/Fail:
V80_IOL_NVMe_04.02_RegCAP-MPSMIN.sh¶
Objective:
CAP controller register memory page size minimum (MPSMIN) tests
Pass/Fail:
V80_IOL_NVMe_04.07_RegCAP-CQR.sh¶
Objective:
CAP controller register contiguous queues required (CQR) tests
Pass/Fail:
V80_IOL_NVMe_05.05_CmdSpecificErrs.sh¶
Objective:
Command specific errors definition tests
Pass/Fail:
V80_IOL_NVMe_01.08_GetFeatureSelect.sh¶
Objective:
Get features command using select field tests
Pass/Fail:
V80_IOL_NVMe_08.03_AutoPSTransition.sh¶
Objective:
Autonomous power state transition tests
Pass/Fail:
V80_IOL_NVMe_04.17_RegCSTS-CFS.sh¶
Objective:
CSTS controller register controller fatal status (CFS) tests
Pass/Fail:
V80_IOL_NVMe_04.03_RegCAP-CSS.sh¶
Objective:
CAP controller register command sets supported (CSS) tests
Pass/Fail:
V80_IOL_NVMe_06.02_FunctionReset.sh¶
Objective:
Controller level reset function level reset tests
Pass/Fail:
V80_IOL_NVMe_04.09_RegINTMS-INTMC.sh¶
Objective:
INTMS controller register interrupt mask set and INTMC controller register interrupt mask clear tests
Pass/Fail:
V80_IOL_NVMe_04.06_RegCAP-AMS.sh¶
Objective:
CAP controller register arbitration mechanism supported (AMS) tests
Pass/Fail:
V80_IOL_NVMe_04.10_RegCC-IOCQES.sh¶
Objective:
CC controller register I/O completions queue entry size (IOCQES) tests
Pass/Fail:
V80_IOL_NVMe_01.07_AsynchronousEvents.sh¶
Objective:
Asynchronous event request command tests
Pass/Fail:
V80_IOL_NVMe_02.10_AWUPF-NAWUPF.sh¶
Objective:
Atomic Write Unit Power Fail (AWUPF) and Namespace Atomic Write Unit Power Fail (NAWUPF) command tests
Pass/Fail:
V80_IOL_NVMe_04.16_RegCSTS-SHST.sh¶
Objective:
CSTS controller register shutdown status (SHST) tests
Pass/Fail:
V80_IOL_NVMe_10.01_PCIExpressCapReg.sh¶
Objective:
PCI express capability registers tests
Pass/Fail:
V80_IOL_NVMe_04.01_RegCAP-MPSMAX.sh¶
Objective:
CAP controller register memory page size maximum (MPSMAX) tests
Pass/Fail:
V80_IOL_NVMe_05.04_GenericCmdStatus.sh¶
Objective:
Generic command status definition tests
Pass/Fail:
V80_IOL_NVMe_04.13_RegCC-AMS.sh¶
Objective:
CC controller register arbitration mechanism selected (AMS) tests
Pass/Fail:
V80_IOL_NVMe_05.06_MediaDataIntegErrs.sh¶
Objective:
Media and data integrity errors definition tests
Pass/Fail:
V80_IOL_NVMe_04.12_RegCC-SHN.sh¶
Objective:
CC controller register shutdown notification (SHN) tests
Pass/Fail: